Manual Pc Adjustment - Eiki LC-WGC500 Owner's Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall
the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the PC Adjust Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point buttons to adjust the setting value.
7 8
Fine sync
Use the Point buttons to adjust the value, eliminating a
7 8
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point buttons to adjust the number of total
7 8
dots in one horizontal period to match your PC image.
Horizontal
Use the Point buttons to adjust the horizontal picture
7 8
position.
Vertical
Use the Point 7 8 buttons to adjust the vertical picture
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point buttons to adjust the clamp level. When
7 8
the image has dark bars, try this adjustment.
buttons to move the red
7 8
Computer Adjustment
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer
to the desired item and
press the SELECT button.
Status (Stored/Free) of the
selected Mode.
Selected Mode
Use the Point
to adjust the value.
Press the SELECT button
here to adjust other items.
Press the SELECT button at
Current mode to show the
information of the connected
computer.
buttons
7 8
39