Turning Off The Projector - Eiki LC-WGC500 Owner's Manual

Turning Off the Projector

1
Press the ON/STAND-BY button on the top control
or the STAND-BY button on the remote control, and
"Power off?" appears on the screen.
2
Press the ON/STAND-BY button or the STAND-BY
button on the remote control again to turn off the
projector. The POWER indicator starts to blink red after
3 seconds. After the projector is turned off, the cooling
fans operates for 90 seconds. At this period of time you
can unplug the AC power cord even if the fans are still
running. During the POWER indicator is blinking, you
cannot turn on the projector.
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn
on the projector. After it is cooled down completely,
unplug the AC power cord.
TO MAINTAIN LIFE OF THE LAMP , ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF .
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR STOPS BLINKING.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
✔ Notes:
• When the On start function is set to "On, " the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.57).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNINGTEMP . indicator blinks or emits red light,
see "Warning Indicators" on page 69.
• While the POWER indicator is blinking, the lamp is being
cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.
•The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
•The projector can be turned on after the POWER indicator
turns red.The waiting time to restart will be shortened
when the normal power-off processing for fan cooling is
completed, compared with the time the AC power cord is
immediately unplugged after the power-off.
"Power off?" disappears after 4 seconds.
Basic Operation
25