Table of Contents
Advertisement
4.
iQ Setup will display all available 2.4GHz and 5GHz Wi-Fi networks, listed
under "SSID". Please select one or both root Wi-Fi networks that your
extender will connect to and subsequently extend. If you don't wish to use
either the 2.4GHz or 5GHz band you must select "Disable" in order to
continue.
Note:
not appear, click "Refresh" to search again. Please
also be aware that for the 5GHz band, subject to local
RF regulations the EW-7238RPD only supports
channels 36, 40, 44 & 48 (Europe) and channels 36, 40,
44, 48, 149, 153, 157, 161 & 165 (U.S.) If you do not
see your 5GHz network listed, you may need to change
your router/access point's 5GHz channel.
5.
If the network you wish to connect to has a hidden SSID, select "Setup
extender manually" and enter the SSID manually. Then input a "Device
SSID" and security key information – please refer to the user manual for
more detailed guidance.
If the Wi-Fi network you wish to connect to does
5
Advertisement
Table of Contents
