Table of Contents
Advertisement
Note:
the congratulations screen in Step 11, then please skip
straight to step 12.
Typically, this may occur for smartphone users who
setup the extender via a wireless connection (as
shown in II-1. iQ Setup 2.ii). It is likely that after the
extender restarted, your smartphone re-connected to
the Edimax.Setup SSID which is now, upon completion
of setup, redundant.
11.
After the device has restarted you will see a congratulations screen as
shown below, displaying the name and security key for each of the
extender's Wi-Fi networks.
12.
The extender is now functional and ready for use. If you wish to move
the extender to another location, remember to switch off the extender
before you unplug it. For the best coverage, select a location where the
extender's signal strength LED (
After the system has restarted, if you do not see
) displays a strong signal.
9
Advertisement
Table of Contents
