Table of Contents
Advertisement
Resetting the Wi-Fi Extender
If you experience problems with your Wi-Fi extender you can reset the
extender back to factory default settings. This resets all settings back to
default.
To reset the extender, press and hold the WPS/Reset button for 10 seconds
until the power LED (
power LED (
) will display on when the extender is ready (see LED Status).
Browser Based Configuration Interface
After completing iQ Setup you can access the browser based configuration
interface to further configure the settings of the extender, or run iQ Setup
again.
To access the browser based configuration interface, enter
http://edimax.setup
is connected to the extender's Wi-Fi network. You will be prompted for a
username and password. The default username is "admin" and the default
password is "1234".
) is flashing. The extender will re-initialize and the
into the URL bar of a web browser on a computer which
Windows:
14
Advertisement
Table of Contents
