Front Panel (Rx-V673) - Yamaha RX-V673 Owner's Manual

Front panel (RX-V673)
@ MAIN ZONE O key
Turns on/off (standby) the unit.
@ Standby indicator
Lights up when tile unit is in standby mode under any of tile
following conditions.
• HDMI Control is enabled (p.96)
• Standby Through is enabled (p.97)
• Network Standby is enabled (p.98)
• An iPod is being charged (p.58)
@ YPAO MIC jack
For connecting the supplied YPAO microphone (p.37).
@ ZONE 2 key
Enables/disables the audio output to Zone2 (p.75).
@ Remote control sensor
Receives remote control signals (p.5).
@ ZONE CONTROL key
Changes the zone (main zone or the Zone2) that is controlled
by the keys and knobs on the front panel (p.75).
@ INFO key
Selects tile information displayed on tile front display (p.77).
@ MEMORY key
Registers FM/AM radio stations as preset stations (p.54).
@ PRESET keys
Select a preset FM/AM radio station (p.54).
@ FM and AM keys
Switch between FM and AM (p.53).
@ Front display
Displays information (p.10).
@ TUNING keys
Select tile radio frequency (p.53).
@ PURE DIRECT key
Enables/disables Pure Direct (p.51).
@ PHONES jack
For connecting headphones.
@ INPUT keys
Select an input source.
@ TONE CONTROL key
Adjusts tile high-frequency range and low-frequency range
of output sounds (p.79).
@ SCENE keys
Select tile registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.46).
@ PROGRAM keys
Select a sound program or a surround decoder (p.47).
@ STRAIGHT key
Enables/disables the straight decode mode (p.50).
@ VIDEO AUX (HDMI IN) jack
For connecting a device, such as a camcorder and a game
console (p.31).
@ USB jack
For connecting a USB storage device (p.62) or an iPod
(p,58).
VIDEO jack
For inputting video when "USB" is selected as the input
source (p.58).
@ VOLUME knob
Adjusts the volume.
FEATURES • Part names and functions En 9