Yamaha RX-V673 Owner's Manual page 75

Controlling Zone2 4
AV 5-6
AUDIO 1-2
USB
NET
MAIN/ZONE2
MUTE
SLEEP
Set MAIN/ZONE2 to "ZONE2".
Press RECEIVER _.
Each time you press the key, Zone2 output is enabled or
disabled.
When Zone2 output is enabled, "ZONE2" lights up in the
front display.
Use the following keys to select an input source.
AV 5-6: AV 5-6 (AUDIO) jacks
AUDIO 1-2: AUDIO 1-2 jacks
TUNER: FM/AM radio
USB: USB jack (on the front panel)
NET: NETWORK jack (press repeatedly to select a desired
network source)
PHONO: PHONO jacks (RX-V773 only [except for U.S.A.
and Canada models])
• You cannot select USB and network sources exclusively for each zone. For
example, if you select "SERVER" for Zone2 when "USB" is selected for the
main zone, the input source for the main zone also switches to "SERVER".
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
• Listening to FM/AM radio (p.53)
• Playing back iPod music (p.58)
• Playing back music stored on a USB storage device
(p.62)
• Playing back music stored on media servers (PCs/NAS)
(p.65)
• Listening to Internet radio (p.68)
• Playing back iTunes/iPod music via a network (AirPlay)
(p.70)
• The on-screen operations are not available for Zone2. Use the front display
to control Zone2.
• To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP
repeatedly. The Zone2 output will be disabled after a specified period of
time.
• To adjust the Zone2 volume, press VOLUME or MUTE (when using the
unit's internal amplifier). When using an external amplifier, use the volume
control on it.
Cautior'_
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
PLAYBACK • Playing back musicin multiple rooms(multi-zone) En 75