Yamaha RX-V673 Owner's Manual page 80

Extended Surround (EXTD Surround)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Settings
Automatically selects the most suitable decoder if signals that contain
Auto (Auto) surround back channel signals are input, and reproduces the signals
(default) in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
ITIPLIIx Movie Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
(ITIPLIIxMo) back speakers are connected.
ITIPLIIx Music Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
(ITIPLIIxMu) surround back speakers are connected.
Automatically selects the Dolby EX or DTS-ES decoder, and
EX/ES (EX/ES) reproduces signals in 6.1- or 7.1-channel.
Always reproduces signals in their original channels. (Even when
Off (Off) DTS-ES or Dolby Digital EX signal is input, the unit reproduces the
signal in 5.1-channel.)
• Some Dolby Digital EX or DTS-ES sources do not contain a flag for reproducing surround back channel. In
this case, the unit reproduces the signals in 5.1-channel if "Extended Surround" is set to "Auto". To
reproduce the signals in 6.1 or 7.1-channel, set it to "iTiPLllx Movie", "iTIPLIIx Music", or "EX/ES".
Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
• This setting is applied separately to each input source.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.52).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.52).
Settings
Off (Off)
On (On)
Disables Compressed Music Enhancer.
Enables Compressed Music Enhancer.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
Video Mode (Video Mode)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in "Processing" (p.95) in the "Setup" menu.
Settings
Processing
(Processing) Enables the video signal processing.
Direct (Direct)
(default) Disables the video signal processing.
FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
Settings
Stereo (Stereo) Receives FM radio in stereo sounds.
(default)
Mono (Mono) Receives FM radio in monaural sounds.
PLAYBACK • Configuring playback settings for different playback sources (Option menu) En 8()