Connecting An Ipod - Yamaha RX-V673 Owner's Manual

You can play back iPod music on the unit using a USB cable
supplied with the iPod.
• Some features may not be compatible, depending on the model or software
version of the iPod.
• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)
is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO jack on the front panel. To select a video,
operate the iPod itself in the simple play mode (p.60).
Su[_[_orted iPods (as of J_"_u_y 20!2}
• iPod touch, iPod nano (2nd gen. to 6th gen.)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
• iPad2, iPad
Connecting an iPod
Connect your iPod to the unit with the USB cable supplied with the
iPod.
Connect the USB cable to the iPod.
2 Connect the USB cable to the USB jack.
The unit (front)
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours. If
"Network Standby" (p.98) in the "Setup" menu is set to "On", it continues to change
until full.
• Disconnect the iPod from the USB jack when it is not in use.
PLAYBACK • Playing backiPod music I En 58