Yamaha RX-V673 Owner's Manual page 39

ENTER
RETURN
Multi measure
Single measure (5 listening positions)
Multi measure Multi measure
(1 listening position + front/back/left/right) (2 listening positions + front/back'
Measuring at one listening position
(single measure)
Follow the procedure below for measurement.
• Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
• Move to the corner of the room or leave the room.
To start the measurement, use the cursor keys to
select "Measure" and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
• To cancelthe measurement t emporarily,pressRETURN.
The following screen appears on the TV when the
measurement finishes.
This completes the preparations. See the following page to start the
measurement.
When "Multi Position" is set to "Yes":
"Measuring at multiple listening positions (multi measure) (RX-V773
only)" (p.40)
When "Multi Position" is set to "No":
"Measuring at one listening position (single measure)" (p.39)
• If any error message (such as E-l) or warning message (such as W-l)
appears, see "Error messages" (p.43) or "Warning messages" (p.44).
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.41).
PREPARATIONS • Optimizing the speaker settings automatically (YPAO) En 39