CONTROL PANEL AND FEATURES
Not all features and options are available on all models.
Select the setting most suitable for your load. Small will add
a low amount of water for smaller loads and Super will add
the most amount of water for large or bulky loads. Items
need to move freely. Tightly packing can lead to poor
and may increase wrinkling and
Temperature control senses and maintains uniform
by regulating incoming hot and
Select a wash temperature
based on the type of fabric
and soils being washed. For best results and following
the garment label instructions,
use the warmest wash
water safe for your fabric.
* Warm and hot water will be cooler than what your
previous washer provided.
. Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
OPTIONS (on some models)
The following options may be added to most cycles.
This option can be used to automatically
add a second
rinse to most cycles.
FABRIC SOFTENER ADDED-YES
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
FABRIC SOFTENER ADDED with EXTRA RINSE
This option turns on both the Fabric Softener and the
Extra Rinse options.
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: if the washer is spinning, it may take several
minutes to unlock the lid. Press and hold for 3 seconds
to cancel a cycle.