Advertisement
PROBLEM
CAUSE
TheSelf-Cleaning cycle
÷Youdidnot press the start/enter p ad.
willnotwork
÷Youhave seta delayed starttime.Waitforthestarttimeto bereached or
cancel a ndreset t hecontrol.
PROBLEM
CAUSE
Cooking results are
notwhatyouexpected
÷Theoventemperature s eems too lowor too high.See"Adjusting theoven
temperature c ontrol"onpage17to adjust t heoventemperature.
÷Youdidnotpreheat the ovenbeforebaking(ifcalledforinthe recipe).
÷Youareusinga panthatis notthe correct t ypeor size.Refer t o a reliable
cookbook or recipe forthe recommended pantypeandsize.
÷Thereis notenough airspace around the panwhenbaking. A llow11½
to 2 inches of airspaceonallsidesofthe pan.
÷Theflamesizedoesnotfit thecookware beingused.
÷Whenbroiling, y ouhavenotcompletely c losed theovendoor.
÷Theflowof combustion a nd/orventilation a irto therange is blocked. M ake
surenothing is blocking the middle frontofthe backguard.
÷Therange is notlevel.(See the Installation I nstructions.)
PROBLEM
CAUSE
The display is showing
÷ There has been a power failure. Press the off/cancel pad to clear the
"PF"
display, then reset the clock. (See page 12.)
"F" followed by a
÷ Press the off/cancel
pad to clear the display. If an "F" code appears again,
number shows on
call for service. (See "If You Need Assistance or Service" on page 39.)
the display
If none of these items are causing your problem, see "Requesting Assistance or Service" on page 39.
38
Advertisement
