Advertisement
Tonestellyouif a function is entered correctly or
not.They alsotellyouwhena cycleiscompleted.
To shut off all tones except the end-of-timer
and
error tones:
Press and hold the stop time pad for 5 seconds.
B
A short tone will sound to tell you the
tones have been changed. Repeat to turn
the tones back on. You will see "oFF" for
3 seconds when the tones are turned off
and "on" for 3 seconds when they are
turned on.
To choose between high and low volume tones:
Press and hold the delay start time pad for 5 seconds.
A short tone will sound to tell you the tones
have been changed. Either "HI" or "LO" will
appear on the time display for 3 seconds to
show the volume you chose.
Your oven is designed with the AccuBake tempera-
ture management system to constantly monitor
oven temperature. The burner element will cycle,
as needed, to maintain the desired temperature.
This feature is automatically
activated when the
oven is in operation.
_MP©IIBI_N°[°: Do not try to light the oven burner
during a power failure.
1, Place the racks where you need them in the oven.
For more information,
see "Positioning
racks
and pans" earlier in this
Front
section.
Rear
2o Choose the bake setting (optional).
PRESS
YOU SEE
8, Set the temperature
(optional).
Do this step if you want to set a temperature
other than 350°F. Press the • temp pad to raise
the temperature
or the • temp pad to lower the
temperature
in 5°F amounts. Use these pads
until the desired temperature shows on the
small display.
PRESS
YOU SEE
14
(example for bake at 375°F)
Advertisement
