Advertisement
[®deantheB ne s:
1, Pull the burner cap straight up from the
burner base.
2, Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a
mildly abrasive scrubbing pad or cleanser.
Do not clean the burner cap in a dishwasher or
self-cleaning oven.
8, If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
4. If the ports are clogged, clean them with a
_..__
traight pin. Do not
enlarge or distort the
port. Do not use a
wooden toothpick. If
the burner needs to be
I
adjusted, call a qualified
technician for service.
5, After cleaning the gas tube opening and ports,
replace the burner cap.
Alignment
To replace the burner
cap, make sure the
alignment pins on the
cap are properly aligned
with the burner base.
G, Turn on the burner to see if it will light. If the
burner does not light after you have cleaned
it, recheck cap alignment or contact an
authorized service technician. Do not service
the sealed burner yourself.
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions
in this section.
MOTILE: I f the door removal pins included in the
Anti-Tip Bracket Package are not available, nails or
screws may be used. Be careful that the length of
the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
Insert door
removal pin here
£::{
J
Oven door
..-?
Hinge
hanger
34
Advertisement
