Side Burner Troubleshooting; Side Burner Maintenance - Weber Genesis 6721001 Owner's Manual

PROBLEM CHECK CURE
Side Burner does not light. Is gas supply off? Turn supply on.
The excess flow safety device,
which is part of the barbecue to
cylinder connection, may have
activated.
Flame is low in HIGH position Is the fuel hose bent or kinked?
Push button ignition does not Does burner light with a match?
work.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area
using the contact information on our web site. Log onto www.weber.com ®.
To reset the excess flow safety device turn all burner control
knobs and the cylinder valve OFF. Disconnect the regulator from
the cylinder. Turn burner control knobs to HIGH. Wait at least 1
minute. Turn burner control knobs OFE Reconnect the regulator
to the cylinder. Turn cylinder valve on slowly. Refer to "Lighting
Instructions".
Straighten hose.
If match lights burner, check igniter (see below).
SIDE BURNER MAINTENANCE
/kWARNING: All gas controls and supply valves
should be in the OFF position.
Make sure black wire is connected between the igniter and electrode
(1). Make sure white wire is connected between the igniter and
grounding clip
(2). Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob