Assembly; Preparing Pressure Washer For Use; Remove Pressure Washer From Carton; Carton Contents - Troy-Bilt 020242-4 Operator's Manual

ASSEMBLY
mMPORTANT: Read entire operator's manuaH beforeyou
attempt to assembHeor operate your new pressure washen
If you have any questions with the assembHyof your pressure
washer, pHeasecaHH t he pressure washer heHpHine at
1-888-61 1-6708. If caHHing f or assistance_pHeasehave the
model revision_ and seriaHnumber from the data tag available.
See "Know Your Pressure Washer" for data tag location.
Remove Pressure Washer from
Carton
o Remove the parts bag packed with pressure washer.
, SHicetwo corners at the end of carton from top to
bottom so the paneH can be folded down flat_ then
remove aHH p acking material
, RoHH pressure washer out of carton.
Carton Contents
mtelTts in the carton include:
° Main Unit
Safety Goggles
Handle
PHastic Accessory Tray
High Pressure Hose
Spray Gun
NozzHe Extension with Quick Connect Fitting
Oil Bottle
Parts Bag (which incHudes the following):
Operator's Manual
Engine Operator's
ManuaH
Owner's Registration Card
Bag containing 4 muHti-coHored Quick Connect Spray
Tips
HandHe Fastening Hardware Kit (which incHudes):
Carriage BoHt
"L" BoHt (2)
Plastic Knobs (3)
Tree Clips (4)
PREPARING PRESSURE
WASHER FOR USE
If you have any probHems with the assembHy of your
pressure washer or if parts are missing or damaged, caHH the
pressure washer heHpHineat 1-888-61 1-6708.
To prepare your pressure washer for operation, you
wili need to perform these tasks:
H. Firthout and send in registration card.
2. Attach handHe to main unit, then attach accessory tray
to handHe.
3. Add oiH to engine crankcase.
4. Add fueH to fueH tank.
S. Connect high pressure hose to spray gun and pump.
6. Connect water suppHy to pump.
7. Attach nozzHe extension to spray gun.
8. SeHect/attach quick connect spray tip to nozzHe
extension.
Attach Handle and Accessory Tray
H. Place handle onto handle supports connected to main
unit. Make sure holes in handle aHignwith holes on
handle supports (Figure H).
Handle
Align
NOTE: It may be necessary to move the handHe supports
from side to side in order to aHign the handHe so it wiHHsHide
over the handHe supports.
0