Communicating With The Dolphin Terminal - Hand Held Products 7600BG-122-B4EE - Dolphin 7600 User Manual

Setting Up the Dolphin Terminal
The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default setting, tap Start >
Settings > Control Panel > PC Connections.)
Must be checked to connect with a workstation.
Displays the current connection setting.
Tap Change Connection to change the current settings.
Connection Options
'115200@Desktop
Bluetooth
'Infrared Port
'USB

Communicating with the Dolphin Terminal

After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1. Connect the Dolphin terminal to the a communication peripheral, such as the Dolphin HomeBase.
2. The Dolphin terminal automatically opens ActiveSync to establish a connection.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal's mechanical connector connects to a Dolphin
peripheral that is connected to a host workstation with ActiveSync installed.
Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main ActiveSync window (on the desktop), and click Explore.
6 - 4
Downloaded from www.Manualslib.com
Select this option to ...
Establish an RS-232 connection.
Establish an ActiveSync connection via Bluetooth; see
This menu item is present only when Bluetooth has been activated.
Establish an ActiveSync connection via the
Establish a USB connection.
10/18/2007
manuals search engine
Tap to change the connections settings.
IrDA Port (see page 3-11).
Rev D
Bluetooth ActiveSync on page
Dolphin® 7600 User's Guide
7-10.