Garmin G3X Pilot's Manual page 332

Appendix C
• Intersections—identifier, nearest VOR, radial and distance from nearest VOR,
location (latitude/longitude), and region/country.
• ARTCC—Air Route Traffic Control Centers.
• Airspace—boundaries (Class B, Class C, Control Zones, SUAs, and MOAs),
controlling agency, and vertical boundaries.
• FSS—Flight Service Stations.
FLITECHARTS
The FliteCharts database contains procedure charts for the United States only. This
database is updated on a 28-day cycle.
CHARTVIEW
ChartView database is revised every 14 days. Charts are still viewable during a
period that extends from the cycle expiration date to the disables date. ChartView is
disabled 70 days after the expiration date and is no longer available for viewing. The
ChartView database is always on the SD Card and is not copied to the GDU's internal
memory.
SAFETAXI
The SafeTaxi database contains detailed airport diagrams for selected airports.
These diagrams aid in following ground control instructions by accurately displaying
the aircraft position on the map in relation to taxiways, ramps, runways, terminals, and
services. This database is updated on a 56-day cycle.
OBSTACLE
The obstacle database contains data for obstacles, such as towers, that pose a
potential hazard to aircraft. Obstacles 200 feet and higher are included in the obstacle
database. It is very important to note that not all obstacles are necessarily charted and
therefore may not be contained in the obstacle database. This database is updated on
a 56-day cycle.
314
Garmin G3X Pilot's Guide 190-01115-00 Rev. F