Dedicated Traffic Page (Trf) - Garmin G3X Pilot's Manual

Hazard Avoidance
Enabling/disabling traffic on the Synthetic Vision display:
1) From the full-screen PFD and/or the split-screen PFD Page, press the MENU
Key.
2) Move the FMS Joystick to highlight the 'TRAFFIC' field.
3) Turn the FMS Joystick to highlight 'On' or 'Off'.

DEDICATED TRAFFIC PAGE (TRF)

Displaying/Removing the Traffic Page:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Move the FMS Joystick to highlight the Traffic Page field.
5) Turn the FMS Joystick to highlight 'Show' or 'Hide'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
Disabling/Enabling the traffic alerts:
NOTE: Traffic alerts are reset to 'enabled' on the next power cycle.
1) Display the dedicated Traffic (TRF) Page as decribed in the procedure above.
2) From the Traffic (TRF) Page touch the DISABLE Softkey to enable/disable
traffic alerts.
206
Garmin G3X Pilot's Guide 190-01115-00 Rev. F