Activating Vectors-To-Final - Garmin G3X Pilot's Manual

Flight Planning

ACTIVATING VECTORS-TO-FINAL

After an approach has been activated, the VECTORS Softkey is used when being
vectored to the final approach course by Air Traffic Control (ATC).
If the VECTORS Softkey is pressed, the G3X creates an extension of the final course,
beyond the final approach waypoint in the database (final approach fix [FAF]). On
the Active Flight Plan Page, a Vector to Final symbol appears beside the first approach
waypoint.
Vectors-to-Final
Symbol
The G3X does not provide guidance to the inbound course. The course deviation
needle on the graphic HSI remains off-center until established on the final approach
course. The map shows an extension of the final approach course using a bold
magenta line.
174
Blank Page
Vectors-to-Final (Active Flight Plan Page)
(Split-Screen)
Vectors-to-Final (Map Page)
(Split-Screen)
Garmin G3X Pilot's Guide
VECTORS Softkey
Final Course
Extension
190-01115-00 Rev. F