Selecting A Runway - Garmin G3X Pilot's Manual

If duplicate entries exist for the entered facility name or location, additional entries
may be viewed by continuing to turn the FMS Joystick during the selection process.
If duplicate entries exist for an identifier, a Duplicate Waypoints Window is displayed.
Press the ENT Key to move the cursor to the Duplicate Waypoints Window.
Duplicate Waypoints Window
Waypoint Information Window-Duplicate Identifier

Selecting a runway:

1) With the Waypoint (WPT) Page displayed, press the INFO Softkey.
2) Press the FMS Joystick to activate the cursor.
3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier for
the desired runway (turning it counter-clockwise brings up the waypoint
selection submenu - press the CLR Key or the FMS Joystick to remove it),
or move the FMS Joystick to select the facility name, or city field.
4) Press the ENT Key. Full-Screen: continue to Step 7.
5) Press the RUNWAY Softkey (split-screen only).
6) Press the FMS Joystick to activate the cursor (split-screen only).
7) Move the FMS Joystick to place the cursor in the 'Runway' Box, on the
runway designator.
190-01115-00 Rev. F
Runways Box (Waypoint Page)
Garmin G3X Pilot's Guide
GPS Navigation
135