Recording - Sherwood RD-6108 Owner's Manual

RD-6108(A) 2003.3.4 3:54 PM _t101_121
RECORDING i
• The analog signals from the 6 OH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
• The volume and tone (bass, treble) settings have no effect on the recording signals.
_eRecording with TAPE MONITOR
Start recording on the TAPE MONITOR.
Select the desired input as a recording
source except for TAPE MONITOR.
............ Start play on the desired input.
or
• For tape monitor function, refer to "TAPE
• Be sure that "TAPE M" goes off. MONITOR function" on page 10.
Dubbing from video components onto
Start recording on the VIDEO l.
VIDEO 1
Select VIDEO 2 or VIDEO 3 as a recording
som'ce.
Strut play on the VIDEO 2 or the VIDEO 3.
VIDEO
©
or
• The audio and video signals from the VIDEO 2 o1"the
VIDEO 3 will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and fl'om the speakers.
Dubbing the audio and video signals Select CD asan audio recording source.
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal sepm'ately onto
VIDEO 1......
Select VIDEO 2 as a video recording source. _
or
VIDEO
©
or
!/