Sherwood RD-6108 Owner's Manual page 11

When CD, VIDEO 1-3 is selected as an
input source
Select the digital or analog input
connected as desired.
DIGITAL
INPUTS
©
• Each time this button is pressed, the corresponding
input is selected as follows ;
y o(ptical) 1 _ c(oaxial) 1 --+c(oaxial) 2
A(nalog) - q
• To listen to a DTS o1"Dolby Digital program som'ce
in the 2-CH downmix mode, in the stereo mode, the
corresponding digital input should be selected. (For
details, refer to "Downmixing into 2 fi'ont channels"
on page 18.)
mNotes :
• When the selected optical or coaxial digital input is
not connected, the selected digital input display is
flickering, meaning no sound. (Refer to
"ENJOYING SURROUND SOUND" on page 15.)
• The sound fl'om the component connected to the
selected digital input can be hem'd regardless of the
selected input source.
Operate the selected component for
playback.
• When playing back the program sources with
surround sound, refer to "ENJOYING SURROUND
SOUND'" on page 15.
Adjust the (overall) volume.
MASTER VOLUME I
To compensate for edgy or shrill movie
sound tracks.
CINEMA EQ
• Then "C-EQ ON" is displayed.
• Press it again to cancel, the "C-EQ OFF" is
displayed.
• When the 6 CH DIRECT is selected as an input
source, the cinema EQ function does not work.
To mute the sound.
• "MUTE" will flicker.
• To resume the previous sound level, press it again.
To listen with the headphones.
PHONES
• Ensure that the SPEAKER button is set to off.
• When listening to a DTS or Dolby Digital program
source, if the headphones are plugged in and the
SPEAKER button is set to off, it enters the 2-CH
downmix mode automatically. (For details, refer to
"Downmixing into 2 front channels'on page 18.)
!/