Table of Contents
Advertisement
Adjusting the tone(bass and treble)
Enter the tone mode.
TONE MODE
• Each time this button is pressed, the con'esponding
tone mode is selected and shown for 3 seconds as
follows:
yBASS
_TRBL(treble)
_
• Note: When the TONE DIRECT indicator is
lighting up, the tone mode cannot be
entered.
At the desired tone mode, adjust the tone
as desired.
• If the tone display disappears, start from the step 10
again.
• Notes:
• Extreme settings at high volume may damage your
speakers.
• When the digital signals from DTS or Dolby
Digital program sources are input in available
surround mode, the tone cannot be adjusted and the
tone direct function is automatically switched to
ON.
To listen to a program source without the
tone effect.
TONE
DIRECT
©
• The TONE DIRECT indicator lights up and the
sound that bypasses the tone circuitry will be
heard.
• To cancel the tone direct function, press this
button again.
Hide quick links:
Advertisement
Table of Contents
