Before Starting Playback
LIGHT
If you feel that the indicators on the Player are
too bright when watching movies, you can turn
them off except for the ON indicator.
Quick operation
Press LIGHT to turn the LCD backlight
on or off.
SETUP MENU
operation
1
Press SETUP to display
the SETUP
MENU screen.
2
Press A/_'!4/_
to select
"SETTINGS", then press ENTER.
3
Press A/T
to select "FRONT
DISPLAY/LED', then press ENTER.
4
Press 4/1_ to select "ON" or
"OFF", then press ENTER.
5
Press SETUP or EXIT to exit.
Controlling
the BIu=ray disc
player using AQUOS
LiNK
What is AQUOS LINK?
Using the HDMI CEC(Consumer Electronics
Control), with AQUOS LINK you can
interactively operate this player with your
SHARP AQUOS TV.
What you can do with AQUOS LiNK
When you connect this player to the LCD TV
compatible with AQUOS LINK using an HDMI
cable, you can perform the function listed
below. (See page 14 for connecting to the
HDMI terminal)
Playback function
turns on the LCD TV
immediately.
When you start to playback of this player,
Power of LCD TV will be turned on and the
playback image will appear on the screen.
Automatic
input select function
When you start playback of this player, the
input selector of the LCD TV will automatically
switch to the LCD TV input terminal connected
to the player and the playback image will
appear on the screen, even if you are watching
a TV program.
Automatic
power off function
If you turn off the LCD TV when this player is
in stop mode, the power of this player will be
turned off automatically. (In the case, while
playing back a disc, the power does not turn
off.)
Automatic
power on function
When you switch to the LCD TV input terminal
connected to this player, the power of this
player will be turned on automatically.
NOTE
" In order to make AQUOS LINK available, set up
AQUOS LINK on the LCD TV that is connected to
this player. See page 40 regarding the setup of this
player.
Refer to the Operation Manual of the TV for details
regarding setup.
(_
- 23
Need help?
Do you have a question about the BD-HP20U and is the answer not in the manual?
Questions and answers