Connecting To Tv With Hdmi - Sharp HT-SL72 Operation Manual

Caution:
• Turn off all other equipment before making this connection.
Notes:
• Setthe TV at lowvolume beforeturning on the system.
• GAINknob is invalidduring DIGITAL(HDMI)function.
• Makesureto set the correct inputselectoron the Amplifier to a preferred
connectionbefore usingany of these methods.
ACTIVE CONNECTION INPUT SELECTOR
HDMI Set to DIGITAL
HEADPHONE OUT
Set to ANALOG
RCA
Amplifier
• This unit supports HDMI which enables ARC (Audio Return Channel).
• To enable ARC make sure to use High Speed HDMITM cable (with ARC).
• This ARCfeaturerequiresTV that supportsARC. Referthe operation manualof the TV to determinewhich terminalsupports ARC.
• To listen to the sound from a non-ARC-compatible TV, connect the audio output from TV to this system's AUDIO IN (TV) terminal. (refer
page 12)
• This unit can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC (Consumer
Electronics Control). If this does not work, it does not mean this system is faulty. Referto the operation manualof the respective component
on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming br the CEC. For
SHARP LCD TV, it is named as AQUOS LINK.
• To listen to the sound from this system, you will need to adjust the speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
• If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS AUDIO SP),
turn the CEC OFF and ON again.
• Makesure the LCD TV Audio output setting is set to PCM, not other formats such as Dolby Digital, DTS, etc.
• To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via High Speed HDMI
cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
Select from the 2 methods below:
1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
TV To TV HDMI in 3ut terminal
DVD, BD player
Amplifier _ or similar
f
To TV HDMI (ARC) _=_
terminal
To HDMI (TV ARC) output terminal
Notes:
• Refer to the operation manual of the equipment to be connected.
• Fully insert the plugs to avoid fuzzy pictures or noises.
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
DVD, BD player
or similar
HDMI OUTPUT
To HDMI
input
terminal
Amplifier
To HDMI terminal
TV
Notes for ANALOG connection:
• To enjoy sound from TV via this unit, set the input selector switch on the Amplifier to ANALOG.
• If the sound is too low, use the GAIN knob to adjust it to your desired level.
• Connecting via this method may disable TV internal speakers.