Controls And Indicators; Amplifier System; Front View; Rear View - Sharp HT-SL72 Operation Manual

• Do not expose the unit tomoisture, totemperatures
higher than 140°F ( 60°C) or to extremely low
temperatures.
• Ifyour system does not work properly, disconnect the
AC power cord from the AC outlet and r eplug.
• In case of a n electrical storm, unplug the unit for s afety.
• Hold the AC power plug b y the head when removing it
from the AC outlet, aspulling the cord c an damage
internal wires.
• The A C power plug i sused as adisconnect device and
shall always remain readily operable.
•
Do not remove the outer cover, as this may result in
electric shock, Refer internal service to your local
SHARP service facility,
• This unit should only be used within the range of
41°F - 95°F (5°0 - 35°0).
Warnings:
• The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
• In case of repairing, please bring the entire system set
to the service center.
FRONT VIEW
t 2 3 4
Reference page
1. Gain (AUDIO IN) Knob ...................... 13
2. Pairing Button ............................ 13
3. Input Selector (HT-SL77 only) ................ 13
4. Power/Pairing Indicator ..................... 13
REAR VIEW
6 7 8
pec label *
--NNNINI
The spec label illustration may be
different from the actual label used.
(*) Label is located at the bottom of the unit
Reference page
5. HDMI (TV ARC) Output Terminal
(HT-SL77 only) ........................... 11
6. HDMI Input Terminal (HT-SL77 only) ......... 11
7.Audio In (TV) Terminal .................... 12
8. Speaker Terminal ......................... 10
9. AC Power Cord ........................... 10