Schwinn SB13 Owner's Manual page 25

Hide thumbs Also See for SB13:
Table of Contents

Advertisement

ChangjB_g Levels: You can only increase or decrease the resistance level by
pressing the UP or DOWN buttons when in the first interval column which is
the "warm-up column': This enables you to set your starting warm-up level.
A longer warm-up at lower resistance can burn more Calories than a shorter
warm-up at higher resistance.
After the program exits the first interval "warm
up column" the UP or DOWN buttons become inoperative and the program
automatically
adjusts the resistance to bring you into your selected zone.
The program is designed to slowly bring you up to your selected heart rate
workout zone, hold you within that zone by reading your heart rate and adjust-
ing the level of resistance to keep your workout within that zone, then at the
end of the program slowly bring you down into a cool down zone by reducing
the resistance
level in the last two columns.
As a precaution
if your
heart rate is above your
selected
heart rate zone
and the resistance
level is at the minimum
level for 30 seconds,
the message
"SLOW
DOWN"
will appear
in the alphanumeric
display.
If after one more
minute,
your
heart
rate is still above
your
selected
heart
rate zone,
the mes-
sage "STOP"
will be displayed
and the program
will end.
To STOP or PAUSE the program:
Press the START / PAUSE button to
pause your workout.
The display will show "PRESS RESULT OR PRESS
START': Then if you press the RESULTS button the computer will show your
workout results and end the program, or if you press START / PAUSE the
computer
will resume the program where you left off.
CONSULTYOUR
PHYSICIAN FORTHE HEART RATE ZONE APPROPRIATE FOR
YOU.
u
Console
Operation
-"CUSTOM
01" and "CUSTOM
02" (User-defined)
Select Program:
Press any button to power up the console and "ENTER
PROGRM" appears in the alphanumeric
display. To access the Custom 01 and
Custom 02 programs, scroll through the display by using the UP or DOWN
buttons until you reach "CUSTOM
PROGS" then press ENTER. "CUSTOM
01" will flash.
Use the UP or DOWN buttons to alternate between the two
programs.
Press ENTER to confirm your selection.
EnterTime:
You will then be prompted in the alphanumeric
display to
"ENTERTIME':
Select the desired Time by using the UP or DOWN but-
tons and then press ENTER to confirm your selection. The defaultTime
will be
the last Time a user entered (previous workout).
The minimum time you can
enter is 2:00.
Enter Wei_You
will then be prompted in the alphanumeric
display to
"ENTRWEIGHT
(Ibs. or kgs.)':
Select the appropriate weight by using the UP
or DOWN buttons and then press ENTER to confirm your selection.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr23

Table of Contents