Table of Contents
Advertisement
rate, When both of these situations occur, then the console will perform the
Recovery Test.
The console will show "01:00 STOP" and the time will begin to count down.
Stop exercising but continue to grip the heart rate sensors. After 5 seconds, the
display will show "00:55 RELAX" and will continue to count down to 00:00.
For
the entire minute the console will also show your heart rate. You must grip the
heart rate sensors for the duration of the test.
The display will continue to show "RELAX"
and your heart rate until the clock
counts down to 00:00. The console will then calculate your recovery score.
Recovery
Score
=Your
heart rate at 1:00 (the beginning
of the test)
minus
your
heart
rate at 00:00
(the end of the test)
The display will show "SCORE (Recovery Score)". This will remain on the dis-
play for 5 seconds; then you can press RESULTS to view a summary of your
workout and end the program you are working out in, or press START to resume
working out where you left off.
The higher the RecoveryTest
score value, the quicker your heart rate is returning
to
a more restful
state and is an indication
of improving
fitness.
By recording
these
values over time you can see the trend toward
better health!
When you press the RECOVERY button and there is no heart rate signal or
display, the console will show "NEED HR" and the HEART RATE ICON on the
display will blink. This message will show for 5 seconds, then the Program will
resume. You must see your heart rate on the display and then you must push
the RECOVERY button again to perform the test.
Helpful Tip: For a more relevant score, try to obtain a steady heart rate for 3 min-
utes before pressing the RECOVERY button. This will be easier to achieve, and
obtain the best result, in the Quick Start or Manual program so you can control
level of resistance.
***Please
note: The RECOVERY button does not function when you are in the
BMI program.
Results Mode
When you complete a program, the Results Mode will automatically display and
show your basic workout statistics.
Manually pressing this button during your work-
out will also end the program and then give you your basic workout statistics.
You
cannot return to your workout after pressing this button.
To have the option
of either
ending
your workout
and seeing
your workout
results,
or pausing
your workout
so you can return
to where
you left off, perform
the following
steps:
To STOP or PAUSE the program:
Press the START / PAUSE button to pause
Advertisement
Table of Contents
