Table of Contents
Advertisement
D.
E.
mis-readings
and interference.
You may, from
time
to time find
inconsistencies
with
the heart rate display
on your display
console.
There
are many external
factors
that can affect the heart rate display.
Some
factors
that influence
the reliability
of the heart rate signal
include
the environment
where
the equipment
is used and even
the physiology
of the users themselves.
Electromagnetic
interfer-
ence produced
by such items
as televisions,
computers,
microwave
ovens,
cellular
and cordless
telephones,
and fluorescent
lights
can
also have an effect
on the heart
rate display
on your
equipment.
By
moving
the product
away from
such items,
you may be able to avoid
many
heart rate display
problems.
Resistance Control
-- You can control the resistance of the bike
by using the UP or DOWN buttons. You increase the resistance by
pressing the UP button or decrease the resistance by pressing
DOWN button. You will notice a slight lag in time while the electronic
brake adjusts to your input, so make sure to allow for this and
don't over-compensate.
Sleep Mode -The console will enter a "Sleep" mode and the system
will turn off automatically if there is no input for approximately 2
minutes. Press any button to return the computer
to its pre-
"Sleep" state or press and hold the RESET button for 2 seconds
to clear the computer.
21
Advertisement
Table of Contents
