Timer Recording With The Vcr Plus+ Interactive Program Guide System; Setting Up The Channel List; Using The Vcr Plus+ System - RCA VR639HF User Manual

RECORDING
Recording Feature
6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One Time)
Channel 104 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/99 THU
Tape Speed SLP
Press CLEAR to correct
Press MENU for next prog
Timer Recording with the VCR Plus+
Interactive Program Guide System
You can use the VCR Plus+ system code numbers to simplify timer
programming if you have cable TV and don't receive all channels
through a cable box, or if you receive your TV signal off-air.

Setting Up the Channel List

If you did not set up the VCR Plus+ programming system channel
list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU
2. Display the VCR Plus+ Channel List menu
3. Go to section four, Setting Up Your VCR, if you need more
information on setting up your VCR Plus+ programming
system channel list.
Using the VCR Plus + System
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recodings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 1 to display the VCR Plus+ system menu.
28
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Remember to leave your
cable box on and tuned
to the desired channel
VCR MAIN MENU
1 VCR Plus+
2 Timer Recodings
3 Time
4 Channels
5 Preferences
CHANNELS
6 Audio
7 Language
1 Auto Channel Search
2 Add/Remove Channels
0 Exit
3 Signal Type:
4 VCR Plus+ Channel List
5 Cable Box Setup
VCR+ Channel My Channel
5
4
0 Exit
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
If you receive all channels through
your cable box on Channel 3 or 4, you
must use the regular Timer Recording
method to record programs.
CABLE
46
--
--
--