THINGS
TO KNOW
BEFORE
CONNECTING
COMPONENTS
Protect
Your
Components
from
Power
Surges
•
Connect
all components
before
plugging
any power
cords into the wall outlet.
•
Always
turn off the TV and other components
before
you connect or disconnect
any cables.
¥
V
Position
Cables
Correctly
to Avoid
Audio
Hum or
Interference
Insert all cable plugs firmly into their jacks.
Place the audio/video
cables to the sides of the TV's back
panel instead
of straight
down
the middle
after you
connect your components.
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
Make
sure all antennas
and cables are properly
grounded.
Refer to the Safety
Tips sheet packed
with
your unit.
Protect
Your Components
from
Overheating
•
Do not block ventilation
holes in any of the components.
Arrange
the components
so that air can circulate
freely.
•
Do not stack components.
•
Allow
adequate
ventilation
when
placing your
components
in a stand.
•
Place an amplifier
or satellite
receiver on the top shelf of
the stand so heated
air rising from it will not flow
around
other components.
17
¥
V
V
V
CONNECTIONS
45