Table of Contents
Advertisement
Recording a Program
Recordings
Your VCR provides different recording options. These options are explained in this section of the
manual.
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or
SLP). The speed you select appears on the TV screen and in the VCRÕs
display panel. The VCR automatically selects the playback speed (SP,
LP, or SLP).
SP (Standard Play) gives the best quality recording. That is why
most prerecorded, rental tapes are recorded in SP. Fewer programs
can be recorded on the tape. Special effects such as pause, slow
motion, picture search, and frame advance work well.
LP (Long Play) gives twice the recording time of tapes recorded in
SP. Special effects in playback are not recommended in LP.
SLP (Super Long Play) gives three times the recording time of tapes
recorded in SP. Special effects such as pause, slow motion, picture
search, and frame advance work well.
Using the Recording Features
Recording Pause
This feature allows you to prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start recording. REC P
appears in the VCRÕs display panel.
The VCR will automatically switch from pause to stop after a few
minutes.
Pro-Tect Plus™ Locking Feature
To protect your timer recordings from any unwanted changes, lock the VCR. The buttons on the
VCR and remote will not operate the VCR. Just follow the directions below.
To Lock the VCR
1. Set up your VCR for a timer recording.
2. Insert a cassette with safety tab intact.
3. Place VCR in stop mode.
4. Press and hold PWR on the remote for at least six seconds until
To Unlock the VCR
Press and hold VCR1 (VCR2•LD) on the remote until HELLO appears
in the VCRÕs display panel to unlock the controls.
Cassette
Recording Time
Type
SP
LP
T120
2Hr
4Hr
T160
2Hr 40Min 5Hr 20Min 8Hr
LOCK appears in the VCR's display panel.
SLP
6Hr
33
Advertisement
Table of Contents
