Advertisement
This symbol indicatesthat this product incorporates double
ins@adonbetween hazardousmainsvoltage and user
accessibleparts.
This symbol indicates"dangerous
voltage" inside the product that
presents a risk of electric shock or
personal iqury.
This symbol indicates
important instructions
accompanyingthe product.
FCC JNFORHATmON
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules.These limits are designedto provide reasonableprotection
againstharmful interference in a residential installation.This equipment generates,usesand can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However,there is no guaranteethat interference
will not occur in a particular installation. If this equipment does causeharmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures,
Reorient or relocate the receiving antenna.
Increasethe separation between the equipment and receiver.
Connect this equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets al!requirements of the Canadian Interference - CausingEquipment
Regulations.This classB digital apparatus complies with Canadian CES-O03.
Cet appareil num6rique de la classBest conforme _ lanorme du NHB-O03 du Canada.
i
efer to the identification/rating label located on the back par@ ofpur
product for its proper
operating voltage.
Product
Registration
Pleasefill out the product registration card and return it immediately,Returning the product registration
card allows usto contact you if needed,
Keep},our salesreceipt to obtain warranty parts and service and for proof of purchase.Attach it here and
record the serial and model numbers in caseyou needthem,The numbers are located on the back of the
DVD Recorder,
Model No.
DRC8:_eSN
Purchase Date:
Serial No.
Dealer/Address/Phone:
WARNIING
To reduce the risk of fire or shock hazard,do not expose
this DVD Recorder to rain or moisture,
CAUTION
THIS PRODUCT UTILIZESA LASER,USEOF
CONTROLS OR ADJUSTHENTS OR PERFORMANCE
OF PROCEDURESOTHERTHAN THOSE SPECIFIED
HEREIN HAY RESULTIN HAZARDOUS RADIATION
EXPOSURE.DO NOT OPEN COVERSAND DO NOT
REPAIRYOURSELE REFER SERVICJNGTOQUALIFIED
PERSONNEL.
CAUTION
FCC Regulationsstate that unauthorized changesor
modifications to this equipment may void the user's
authority to operate it.
Note:
This DVD Recorder is designedand manufactured to
respond to the Region Nanagement Information. If the
Region number of a DVD disc does not correspond to the
Region number of this DVD Recorder this DVD Recorder
cannot play the disc.The Region number for this DVD
Recorder is Region No I,
Note:
This device is protected by U.S.patent numbers 4,631,603
and 4,577,216 and 4,819,098 and other intellectual property
rights,The use of Macrovision's copy protection technology
in the device must be authorized by !lacrovision and is
intended for home and other limited pay=per-viewusesonly,
unless otherwise authorized in writing by Hacrovision.
Reverse engineeringor disassemblyis prohibited.
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids,such asvases,shallbe
placed on the apparatus.
Ventilation:
You must adequately ventilate the product, Hake sure there is adequate spacearound the DVD
RecorderNCR to provide proper air flow for ventilation, Seediagram,
The AC power cord is polarized (one blade is wider than the other) and only fits
into AC outlets one way,If the plug won't go into the outlet completely,turn the
plug over and try to insert it the other way,If it still won't fit, contact a qualified
electrician to changethe outlet or use a different one. Do not attempt to bypass
this safetyfeature,
Advertisement
