ProForm AIRwalker User Manual page 7

B A'I-I'ERY_INSTALLATIO N
Before the electronic monitor can be operated, two
"AA" battedee must be installed. If you have not
installed bsttedes, see assembly step 3 on page 4.
OpERATINGTHE ELECTRONIC MONITOR
1. To turn on the power, press the on/reset button or
simply begin exercising on the AIR WALKER. The
entire display will appear for two seconds. The
electmnis monitor willJJlen be ready for operation.
2. Select one of the five modes:
Sc.an mode--Wben the power is tumed on, the
scan mode will be selected automatically. The
scan mode
can also be
selected by
repeatedly
pressing the
mode but-
ton. One
mocle indi-
cator will
show that
the scan
SPEED TIME
DIST. CAL. SCAN
mode 11as been selected, and a second mode indi-
cetor will show which mode Is currently displayed.
Speed, time, distance, or calories mode---
These modes can be individually selected by
repeatedly
pressing
the mode
button. The
mode Indi-
cators will
show which
mode has
been
selected.
(Make sure
that the scan mode is not selected.) The modes
will be selected in the following order:,speed, time,
distance, calories, scan.
J SPEED TIME -J
fl ,_-,ooll
LI IJ
DIST. CAL. SCAN
.
The monitor has an auto-off feature to turn off
the power. If the pedals are not moved and the
monitor buttons are not pressed for four minutes,
the power will tum off automatically in order to
conserve the batteries.
To reset the LCD display, press the on/reset button.
7