Advertisement
Operating
Remote
Control
Before attempting to operate your remote
control, install the batteries
as shown here.
Helpful Hint:
The remote control produces an invisible
(infrared) beam that travels in a straight line
much as the beam of a flashlight. For this
reason, when operating the remote control,
you must point it directly at the front of the
TV without objects between that can block the
infrared light beam.
-- Installing/Replacing
Batteries
1. Turn the remote
control face
down.
2.
Press down on the ridged area
of the battery cover and slide it
off.
4.
Replace the cover and turn remote
over-face
up.
Notes-
• Never place anything heavy on top of the
remote control or lay it upside-down.
This may accidentally depress the
buttons for a long time and discharge the
3.
Install two "AAA" batteries in
the battery compartment as
shown. Make sure you match
the + end of each battery to
the + end of the battery
compartment.
batteries.
Replace the batteries when the TV fails
to respond to the remote control.
Remove the batteries from the remote
control if it will not be used for a month
or more. This will prevent possible
damage from battery leakage.
OFF Button
Number Buttons
'"" and "+" Buttons
Only the remote control buttons that
are used to control the TV are
described
here.
The rest of the
buttons are used to operate
compatible
RCA VCR models and
are described
on page 21.
O
TV Button
(_
DISPLAY Button
_
CLEAR Button
/
_
RESET Button
--'-_-_PC
(Previous Channel) Button
_CHAN
(Channel)
Button
Q
VOL (Volume) Button
(_
MUTE Button
"(_
SETUP Button
AUDIO Button
"_
VIDEO Button
Advertisement
