Advertisement
Follow one of these steps to connect a cable-TV
system to your TV instead
of a home antenna.
Since cable-TV
systems vary, you may wish to consult your local cable-TV
company
for additional
information.
A
Follow this diagram if your cable company does not require a converter/decoder box (no scrambled channels):
¢/_II.W
Am'EN_
Ca ,e'°C° 'n0
-@
BACK
OF_
B
/
Follow this diagram if your cable company requires a converter/decoder box that can be controlled by remote control. Most
brands of remote-controllable
boxes can be controlled by the optional RCU 100 remote shown on page 25. Details for
programming the optional RCU 100 remote to also control the converter/decoder
box are packed with the remote.
Remember to tune your TV to the
Q-_ I
output channel of the converter box
our
(usually2, 3, or 4) when selecting
channels via the converter box.
CONVERTER/DECODER
BOX
CJu_J
BACK
OF TV
C
Follow this diagram if your cable company requires a converter/decoder box that cannot be controlled by remote control:
Incoming
Cable
_1----
-...... _
@ c::_
-__
CO_E_E_OECODER
BOX
BACK
OF TV
Note: These optional accessories (2-way splitter(_), A/B switch (_), three coaxial cablesC) )
are available as a kit under #AH041BL.*
• The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote control.
• The "B" position allows you to select scrambled channels
via the converter box. Remember to tune your TV to the
output channel of the converter box (usually 2, 3, or 4)
when selecting channels via the converter box.
* Optional accessories are available from most dealers or electronics supply stores.
18
Advertisement
