Advertisement
The Digital remote control that came
packed with your TV controls your TV
and a compatible RCA VCR.
To control a compatible RCA VCR, first
press the VCR button to put the remote
in the "VCR mode". The buttons shown
below will then control the VCR.
OFF Button
Press to turn
PLAY Button
Press to start
REW (Rewind) Button
• Press while VCR is stopped to rewind\
tape.
• Press while VCR is playing to search
backward.
PROG (Program)
Button
Used when setting the VCR's clock and
programming its timer.
SAP Button
Press to receive SAP audio.
ANT Button
Press to change VCRkTV switch on VCR
to other position.
Number Buttons
• Press two numbers to select channel.
• Press a "0" before a single-digit
channel number.
PAUSE Button
• Press to pause play or record mode.
• Press again to release pause.
--
VCR Button
• Press to turn on VCR and put remote in
"VCR Mode" so other buttons will
control only the VCR.
• Press the TV button to put remote back
into "TV Mode".
REC (Record) Button
Press to record. It is not necessary to
press PLAY and RECORD with this
remote.
STOP Button
Press to stop whatever VCR is doing:
Playing, Recording, Rewinding, or Fast
Forwarding.
Button
Used when setting the VCR's
clock and
programming
its timer.
(Fast Forward)
Button
* Press while VCR is stopped
to fast
forward
tape.
• Press while VCR is playing
to search
forward.
CHAN
Buttons
Press to select next higher or lower
channel in VCR channel
memory
scan
list.
21
Advertisement
