Advertisement
Repeatedly press the
SETUP button to select
(highlight)
the function you want to adjust, then press
+ or - to change or set it.
Press SETUP
once to see
1st setup menu.
By setting the SLEEP TIMER, you can program your TV to turn
itself off after a certain period of time. This is useful whenever you
want to watch TV for an hour or so before going to sleep. Press the
VOL + or VOL - button to select the length of time you want the
TV to stay on. Details are on the next page.
You can program your TV to turn on at a certain time by setting the
ALARM time and turning the ALARM feature ON. Details are on
page 12.
If the alarm feature is on, the TV will automatically turn on at the
alarm time set above. Details are on page 12.
After you set the CLOCK, you will be able to see the on-screen time
display whenever you change channels or press the DISPLAY button
on the remote control. Hold the + button to set the time forward or
hold the - button to set the time backward. Details are on page 3.
After an extended power failure, the on-screen time display will
disappear and you will have to reset the clock.
Repeatedly press
SETUP to display
2nd setup menu.
AUTOPROGRAR
When you press + or - to start the AUTOPROGRAM feature, the
TV will automatically cycle through all channels and place the
active channels for your area in its channel memory. Pressing the
CHANNEL up or down buttons will then allow you to scan only
active channels. Details are on page 13.
The EDIT CHANNELS feature allows you to erase and add
channels to channel memory as desired. Details are on page 13.
The ANTENNA: CABLE/AIR feature tells your TV whether you
have a cable-TV system or a home antenna connected to it. Your
TV is so automatic that you will probably never need to change this
feature. When your TV autoprograms, it automatically adjusts the
CABLE/AIR setting for you. If you should ever need to override
the automatic setting, press + or - to change it.
The LIST FEATURES display lets you activate your TV to
automatically display a list of its special features. When this
display is selected, you can start the feature list by pressing + or -.
The feature list will continue to repeat until you stop it by pressing
the TV or CLEAR button on the remote or by pressing AUDIO,
VIDEO, or SETUP on the front of the TV.
The setup menu will automatically
disappear from the
screen if you do not press + or - within a few seconds.
Whenever
a menu or display disappears
from the screen,
the VOL + and VOL - buttons
on the front of the TV
become the volume adjustment
buttons.
10
Advertisement
