Advertisement
Repeatedly
press the VIDEO button to select (highlight)
the video function you want to adjust, then press + or - to
select the function.
To set a function to your personal
preference,
press + or - again when an adjustment
display
appears at the bottom of the screen.
Press VIDEO
once to see
1st video menu
The VIDEO RESET
function lets you quickly change all the video
functions
(shown
below) back to the factory settings.
Press either
+ or-
to reset the video functions.
The COLOR function adjusts the amount of color in the picture.
Press + or - to see the color adjustment display at the bottom of
the screen. Then press + or- again to adjust the color.
Press VIDEO
again to see
2nd video menu
llOR
The TINT function
adjusts the color of flesh tones.
Press + or - to
see the tint adjustment
display at the bottom of the screen.
Then
press + to add more red tint, or press - to add more green tint.
The CONTRAST function adjusts the overall brightness and contrast
of the picture. Press + or - to see the contrast adjustment display at
the bottom of the screen. Then press + to increase contrast, or
press - to decrease contrast.
The BRIGHTNESS
function
adjusts the brightness
of the dark
portions
of the picture.
Press + or - to see the brightness
adjustment
display at the bottom of the screen.
Then press + to
increase
brightness,
or press - to decrease
brightness.
The SHARPNESS function adjusts picture sharpness. Press + or -
to see the sharpness adjustment display at the bottom of the screen.
Then press + to increase sharpness, or press - to decrease
sharpness.
The video menu will automatically
disappear
from the
screen if you do not press + or - within a few seconds.
Whenever
a menu or display disappears
from the screen,
the VOL + and VOL - buttons on the front of the TV
become the volume adjustment
buttons.
Adjusting
for a Color
Picture
that Pleases
You
1. Decrease
color to minimum.
This will leave a black-and-
white image on the screen.
2. Adjust contrast
until the picture pleases you.
3. Adjust brightness
until the black parts of the picture appear
black.
You may need to walt until the picture shows
something
you're sure is black to make this adjustment.
Be careful not to lose the details in darkly skaded areas.
4. Increase color until you reach a pleasing
level of intensity.
5. Adjust tint until flesh tones or other color objects appear
natural.
6. Adjust sharpness
for a pleasing
level of picture sharpness.
(For weak signals,
the picture may be more pleasing
with
sharpness
decreased.)
8
Advertisement
