Advertisement
The channel memory
is the list of TV
channel numbers
your TV will stop
on when you press the CHANNEL
up
or down button.
You can program
any list of channels
into the channel
memory.
The quickest
way to program
your
channel memory
is to use the
A UTOPROGRAM
function.
If you
use the A UTOPROGRAM
function,
your TV will automatically
cycle
through all channels
and place active
channels
into the channel memory.
First follow the instructions
to
autoprogram
channels,
and then add
or erase individual
channels
as
desired.
Notes:
• The AutoProgram feature will place into
memory active TV channels that have a
valid signal at the time you autoprogram
your TV.
• An active channel may be missed
occasionally if its signal is very weak or if
the channel happens to be "off the air"
when the TV is autoprogrammed.
• An inactive channel may be included in the
channel memory if there happens to be
some sort of "noise" or "stray signal" on
the channel when the TV is
autoprogrammed.
• Signals from scrambled cable channels
having unusual signal conditions may not
be autoprogrammed.
• Video input channel 91 (which accesses the
INPUT 1 jacks) can be added to channel
memory but cannot be autoprogrammed.
You can add it to memory by using the
EDIT CHANNELS function described at
the right. Once channel 91 has been added
to memory, it will remain in memory until
you erase it. Autoprogramming
will not
erase it from memory.
•
1.
AutoProgramming
Channels
into Channel
Memory
1o Connect home antenna(s) or cable-
3.
Press either + or - to begin
TV to your set.
autoprogramming.
2.
After you have turned on the TV
and adjusted the volume, repeatedly
press the SETUP button on the front
of the TV until AUTOPROGRAM
is
selected (highlighted).
_TOPROGRAM
2nd
Menu
4° When the TV is finished cycling,
you can check to see which
channels are in memory by pressing
the CHANNEL up or down button.
2.
Erasing/Adding
Channels
in Channel
Memory
1.
To erase or add a channel, press
3.
Press + to add the channel to
SETUP repeatedly until the
memory, or press - to erase the
EDIT CHANNELS function is
channel from memory.
selected (highlighted).
Then press
+ or - to enter the function.
°
2nd
Menu
Select the desired
channel number
by pressing
CHANNEL
up or down
(or the two corresponding
number
buttons
on the remote).
Note: To select a 3-digit number (up to
125), press and hold number button 1
until 1-- appears on the screen. Then
press the other 2 numbers.
• If a "+" appears next to the
channel number, then the channel
is in the channel memory list. To
erase the channel, press -.
• If a "-" appears next to the channel
number, then the channel is not in
the channel memory list. Press +
to add the channel.
3. Adding Video Input
Channel
to Channel
Memory
If you have a video device connected to
the INPUT jacks on the back of the TV,
you can view its signal either by directly
selecting channel 91 with the number
buttons or by adding that channel to the
channel memory.
Adding channel 91 to channel memory
allows access to the video input at the
TV by pressing the CHANNEL up and
down buttons as well as by using the
remote control.
13
Advertisement
