Table of Contents
Advertisement
STEP 1
Unpack the TV. Make sure to locate the remote control and
Connections
Foldout.
Important
Information
CAUTION: Choose the location for your TV carefully. Take
precautions
that the stand or other furniture
on which the TV is
placed is properly
located (see Important
Safeguards
sheet)
and of adequate
size and strength to prevent the TV from
accidentally
being tipped over, pushed off, or pulled off. This
could cause damage to the TV and/or personal injury.
STEP 2" CONNECTING
YOUR TV
If you're only going to connect the TV to your home antenna or
cable system, use the "TV Only" connection
shown below. If
you're going to connect the TV to a VCR, satellite receiver, DVD
player or other component,
look at the Connections
Foldout. The
Connections
Foldout details ten diagrams that are recommended
for hooking
up the TV to a cable box or antenna, one or two
VCRs, a DVD player, and a satellite receiver_ "
TV ONLY
This is a basic connection
from an antenna
or cable system to
your TV. Connect the cable as shown. If you have a VCR or other
components
to connect to the .TV,skip to the top of the next
page.
CABLE,
CABLE
BOX, OR ANTENNA
4
Advertisement
Table of Contents
