Audio Menu - RCA C29522 User Manual

AUDIO MENU
Mute Press MENU to reduce the TV's volume to its minimum
level. Press MENU again to restore the volume.
Tone Controls Displays the slider controls for adjusting the TV's
treble, bass and balance.
Audio Processor Displays a choice list of available audio modes,
which control the way the sound comes through your speakers.
Mono Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and
right channels. Most TV programs and recorded materials
have stereo audio. The TV displays the word STEREO when
you tune to a program that is broadcast in stereo.
SRS Stereo (-) *SRS is an audio processing technology that
adds greater depth and stereo separation to stereo audio
signals.
Enhanced SRS Stereo Enhances the SRSsignal to give the
impression of even greater depth and stereo separation.
Sound Logic Stereo Sound Logic monitors a program's
audio track and limits the volume to a minimum and
maximum volume range. Whenever you adjust the volume on
the TV, the minimum and maximum volume range adjusts, too.
Second Audio Program (SAP) Plays the program's audio in
a second language, if one is available. The TV displays the
word SAP when you tune to a program that is broadcast with
SAP information. SAP audio is broadcast in mono.
Audio Output Volume & Speakers
4O
Displays a choice list that
lets you turn the TV's internal speakers on or off and set the
audio outputs to fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV's
speakers on and allows variable output from the TV's audio
output jacks.
Variable Output, Speakers Off This setting turns the TV's
speakers off and allows variable output from theTV's audio
output jacks.
Fixed Output, Speakers Off This setting turns the TV's
speakers off and allows fixed output from the TV's audio
output jacks.
* SRS, Sound Retrieval System and the SRSlogo (-) are
registered trademarks of SRSLabs, Inc.