Setting Up The Channel List; Using Thevcr Plus+ Programming System - ProScan PSVR85 User Manual

TIMER RECORDING WITH THE
VCR
PLUS+
PROGRAMMING SYSTEM
You can use VCR Plus+ to simplify timer programming by using
the PlusCode" programming number shown in your local
television programming guide.
SETTING UP THE CHANNEL LIST
If you did not set up the VCR Plus+ channel list, you can do
it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ channel list.
USING THE VCR PLUS+ PROGRAMMING SYSTEM
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU I
1
VCR
Plus+
/
2 Timer Recordings
3 Time
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR MAIN MENU
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 1 to display theVCR PLUS+ system menu.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
Press MENU to cancel
3. Enter the VCR PlusCode system shown in your local
television programming guide (Screen shown is just an
example).
K]ontinu{'s on t]{,Jct pa,_e)
PlusCode is a registered trademark of the Gemstar Development Corporation
The VCR Plus+ system is manufactured under the license from Gemstar Deve/olJment Coq)oration.
33