Changingthe Signaltype - ProScan PSVR85 User Manual

AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options.
• Cable TVsearches for cable stations fronl a single channel
• Antenna searches for local broadcast stations on all channels
• Detect Automaticallywi[I make this decision for you
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this
takes about one to two minutes. When the scan is complete,
the VCR tunes to the lowest channel number available. At
this point, pressing CHAN + or - on the remote should only
select active channels.
Detect Automatically
A strong cable or antenna signal
in your area may cause Auto
Detect to mis-detect. If this
should happen, select I or 2 for
the system you have.
1
CHANGING THE SIGNAL TYPE
This feature is useful if your cable signal goes out; it allows you
to switch to a regular antenna for alternate television reception.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between Cable and
Antenna. When you are finished, press 0 to exit back to the
Main Menu and 0 again to exit to normal viewing.
11