ProScan PSVR85 User Manual page 23

• The "Press CLEAR to turn off" message will appear only after
the first number has been entered into the end time.
• Auto Repeat is set back to -:-- by resetting the dialog box, by
cassette ejecting or insertion, by powering off the VCR, by
power interruption, or by recording start.
When a duration time has been set:
• The VCR will automatically switch to rewind if the counter
meets or goes past the Auto Repeat set duration.
• The VCR will automatically switch to playback during
rewind if the counter equals or is less than 0:00.
• The Auto Repeat may be adjusted by setting the counter to
00:00. This can be done by pressing the CLEAR button while
the tape counter is on screen or on the front panel display.
• The counter will not reset while rewinding in an Auto
Repeat loop.
21