Table of Contents
Advertisement
Tuner Setup
The following table shows the parameters selectable for each
item.
Font Size
Auto/Large/Standard/Small
Font _
Auto/Font
1 / Font 2/Font
3/Font
4/
Font 5/Font
6/Font
7
Font Color
Auto/Black/White/Red/Green/Blue/
Yellow/Magenta/Cyan
Font Opacity
Auto/Solid/Transparent/Translucent/
Flashing
Background Color
Auto/Black/White/Red/Green/Blue/
Yellow/Magenta/Cyan
Background Opacity
Auto/Solid/Transparent/Translucent
1 Font 1 (monospaced with serifs)/Font
2 (proportionally
spaced with
serifs)/Font
3 (rnonospaced without serifs)/Font
4 (proportionally
spaced without serifs)/Font
5 (casual font)/Font
6 (cursive font)/
Font 7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the boided default
parameters are used. If you select parameters other than
"Auto", the selected parameters are used regardless of
provider's specifications.
Clock Setting
With "Auto Set" selected
for Clock Setting,
tile system acquires
and sets time information
automatically,
You can also manually
set the correct
time,
If you disconnect
the power cord from the
power outlet or power blackout
occurs,
the set time is cleared,
1
Press HOME MENU.
2
Select "Tuner Setup". (÷/4, then ENTER)
;3 Select "Clock". (4./4. then ENTER)
4
Select "Time Zone". (4./4, then ENTER)
5
Select a time zone for your area. (÷/4, then ENTER)
7
Select "Applies" or "Does Not Apply". (41"/4,then ENTER
• Make this selection, depending
on whether summer
time is employed in your area.
8
Select "Auto/Manual
Set". (÷, 4./4,, then ENTER)
9
Select "Auto Set" or "Manual Set". (4./4, then ENTER)
10 If you select "Auto Set", select an antenna (A or B) and a
channel number using "1"/4, and ENTER.
• The date and time will be automatically
corrected using
data from the selected channel.
If you select "Manual Set", manually set the date and
time using 4./4,, 4./4. and ENTER.
11
Press HOME
MENU
to exit the menu.
r_
NOTE
• When the time has not been set, the RECTIMER indicator on the
front of the Media Receiver blinks.
• When the time has not yet been set, you cannot view channel banner
information,
use auto channel select, and preset TV programs for
recording.
m
€_
i
i,
t_
6
Select "D.S.T." (4-, 4./4,, then ENTER)
En
Hide quick links:
Advertisement
Table of Contents
