Selecting A Screen Size - Pioneer PDP-4350HD Operating Instructions Manual

Adjustments and Settings "i
AV mode
4:3
/,r
i WIDE FULL I
• CINEMA .- ZOOM I
PC mode except for XGA signals
4:3
Dot by
Dot
I
PC mode for XGA signals
4:3
l FULL2 *- FULLI I
Selecting a screen size
In single-screen mode, press SCREEN SIZE to change tile size
of the screen from among the sebctable options for the type of
video signals currently received,
• The selectable screen sizes differ depending on the types of
input signals,
AV mode
4:3
FULL
ZOOM
CINEMA
WIDE
For 4:3 "standard" pictures. A side bar appears on
each side,
For 16:9 squeeze pictures,
For 16:9 letterbox pictures. Bars may appear on the
top and bottom with some programs.
For 14:9 letterbox pictures. Bars may appear on the
top and bottom on some programs.
In this mode pictures are progressively stretched
toward each side of the screen.
PC mode except for XGA signals
4:3 Fills the screen without altering the input signal
aspect ratio.
FULL Full 16:9 screen display
Dot by Dot Matches input signal with same number of screen
pixels.
PC mode for XGA signals
(Ex, 1024 x 768 input at PDP-5045HD)
4:3
Matches input signal with the same number of
screen pixels.
Optimized for 1024 x 768 display
FULL1 Full 16:9 screen display
Optimized for 1024 x 768 display
FULL2 For wide signal display
Use when displaying 1280 x 768 signal resolution.
r_ NOTE
• in 2-screen mode, press SCREEN SIZE to change the size of left
screen.
• The PC mode above is for the PDP-5045HD. For the PDP-4345HD the
number of panel pixels is different, so sigrlal processing and actual
viewing conditions will vary slightly.
• While watckfing High Definition TV broadcastirlg, pressing SCREEN
SIZE switches between FULL and WIDE.
• if you watch High Definition TV broadcasting with WIDE selected,
part of the screen (e.g,, images, graphic interface) can be missed, if
this is the case, select FULL.
L
En