Safety Precautions - Pioneer PDP-4350HD Operating Instructions Manual

Safety Precautions }
Installation Precautions
Observe the following precautions when installing with any items such as tile optional stand,
When using the optional stand, brackets, or equivalent items
• Ask your dealer to perform tile installation,
• Be sure to use the supplied bolts,
• For details, see the instruction manual that comes with the optional stand (or equivalent items),
When using other items
• Consult your dealer,
• The following six mounting holes can be used for the installation:
Rear view
Mounting hole
: i
- Mounting hole
Median line
Side view
Plasma
Display
Mounting surface
Mounting
bracket (or
equivalent item
M8 screw
12 to 18 mm
(0,5 to 0,7 inches)
m
t_
I
Median line
Illustration shows PDP-5045HD/4345HD,
,_k CAUTION
• Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines,
• Use M8 screws, which go 12to 18 mm (0,5 to 0,7 inches) in depth from the mounting surface of the Plasma Display, See the side
view above,
• Be careful not to block the ventilation opening at the rear of the Plasma Display,
• Be sure to install the Plasma Display on a flat surface because it contains glass,
• The screw holes other than the above are to be used only for the specified products, Never use them for mounting non-specified
products,
• Do not mount or remove the Plasma Display to or from the stand, with speakers attached,
_'_ NOTE
• It is strongly recommended to use the optional PIONEER mounting products,
• PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than the
optional PIONEER products,
Sn