Setting Child Lock; Selecting A Decoder Input Terminal; Sorting Preset Tv Channels; Clock Setting - Pioneer PDP-435FDE Operating Instructions Manual

Basic Adjustment Settings

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned
and watched.
1
Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), perform the following steps.
2
Select "Child Lock" ( / ).
3
/
Select "Block" ( ).
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Label
Child Lock
Decoder
• The selection is switched between "View" and
"Block".
4
Press HOME MENU to exit the menu.

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input
terminal (INPUT1).
1
Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), do the followings steps.
2
Select "Decoder" ( / ).
3
Select "INPUT 1" ( / ).
Label
Child Lock
Decoder
4
Press HOME MENU to exit the menu.
• With "Off" (factory default) selected, you cannot watch any
images from the decoder.

Sorting preset TV channels

Use the following procedure to change the sequence of the
preset TV programmes.
1
2
3
4
1
42. 75MHz
B/G
Auto
Yes
ABCDE
Block
Off
5
6
7
• To change a page on the Sort screen in step 6, select a/b
on the screen with
ENTER.
• The above procedure transfers and sets only the shifted
channel information to recording equipment such as a VCR
or DVD recorder.
ABCDE

Clock setting

Block
Use the following procedure to set the time correctly.
INPUT1
1
2
3
4
5
6
7
• If the system fails to set the date and time through the
Press HOME MENU.
Select "Setup" ( / then ENTER).
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
Select "Sort" ( / then ENTER).
• The sort screen appears.
Sort
09
01 56789 10
02 01234 11
03 55555 12
04 01234 13
05 56789 14
06 01234 15
07 56789 16
08 01234 17
Select a channel to be shifted ( / ,
Select a new location ( / ,
• Sorting is executed.
Press HOME MENU to exit the menu.
/ to select a page, and then press
Press HOME MENU.
Select "Setup" ( / then ENTER).
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
Select "Clock" ( / then ENTER).
Select "Clock Set Programme" ( / ).
Select a TV channel to be used for auto clock setting
/
( ).
Clock
02/07/2004 FRI 0:00
Clock Set Programme
Press HOME MENU to exit the menu.
selected TV channel, the "Time & Date" entry screen
appears. Set the correct, current time.
then ENTER).
1/4
01234 18 01234
56789 19 56789
01234 20 01234
56789 21 55555
01234 22 01234
56789 23 56789
01234 24 01234
56789 25 56789
01234
/ then ENTER).
/ then ENTER).
then ENTER).
1 ABCDE
09
29
En